Exotic engines and man-made UFOs
The problems with exotic engine solutions are that they need very high-voltage electricity for operating and in the aircraft or another kind of systems the problem is to get device airborne. If the device could rise from the ground, that means the system can use quite little energy for the horizontal movements, but as I said before the problem is lifting the craft from the ground, and after that, the thing would be easy to maneuver.
Of course, we have made the large-size airborne vehicles a long time. Airships are lighter than air solutions, but the problem of those vehicles is that they have poor maneuverability. If the single ammunition from the aircraft cannon hits those vehicles, they can be destroyed.
If we would want to make the heavier than air vehicle, what is the size of the Typhoon-class submarine, the thing would be easy to do by replacing the missile tubes with turbines, what would rise that device above the Earth, but that kind of systems need extreme lots of fuel. And the easier solution would use normal fans, and nuclear reactors for rising that vehicle airborne, but that would be too risky to make in real life.
If we think things like UFO:s and their connection to paranormal activities, we might think, that if the vehicle, what would use magnetic engines would operate near some building, would the high-voltage electric field cause the phenomenon like move metal dishes. In many countries have been tested the man-made UFOs and the problem has always been the power source. Here I must mention, that when I'm writing about the saucer-shaped craft, I mean that the cross-section of the craft would actually look like the hat.
The hypothetical man-made UFO could look like shellfish.
And the vertical form of the device could be everything. But if we are thinking about the round, or saucer-shaped form, that would allow that the craft could move every direction in the same speed, and the horizontal movements can be created by using the radially installed rocket or ion-rocket engines. That hat-shaped space device would rotate the plasma through the hole, where is installed the high power magnets, what would pull the ions through that hole.
The rotating plasma would make overpressure under the device, and that will rise it to hover on the airborne. This system could also installed to every kind of aviation vehicles. That would give the change to create vehicles, what has outstanding maneuverability, and the idea of this kind of systems have claimed to get from the UFO encounters.
The horizontal magnetic ion-accelerators could cause shellfish-shaped form. The craft would use those systems to horizontal movements. This could explain the electric disturbances near the UFO incidents.
The idea of this kind of devices is that they can rise to airborne and if the device can fly horizontally by using quite a small jet or rocket motors, and this thing would also work well if the craft is a cigar-shaped thing. If under the vehicle is the magnet track, it can use ions to move horizontally.
In this case, the device would have furrows on the outer layer, and it would look a little bit like a shellfish. The thing is that the magnets would make ionized gas layer around the craft, and the magnets, what are in its outer layer would use those ions for making the horizontal thrust.
The problems with exotic engine solutions are that they need very high-voltage electricity for operating and in the aircraft or another kind of systems the problem is to get device airborne. If the device could rise from the ground, that means the system can use quite little energy for the horizontal movements, but as I said before the problem is lifting the craft from the ground, and after that, the thing would be easy to maneuver.
Of course, we have made the large-size airborne vehicles a long time. Airships are lighter than air solutions, but the problem of those vehicles is that they have poor maneuverability. If the single ammunition from the aircraft cannon hits those vehicles, they can be destroyed.
If we would want to make the heavier than air vehicle, what is the size of the Typhoon-class submarine, the thing would be easy to do by replacing the missile tubes with turbines, what would rise that device above the Earth, but that kind of systems need extreme lots of fuel. And the easier solution would use normal fans, and nuclear reactors for rising that vehicle airborne, but that would be too risky to make in real life.
If we think things like UFO:s and their connection to paranormal activities, we might think, that if the vehicle, what would use magnetic engines would operate near some building, would the high-voltage electric field cause the phenomenon like move metal dishes. In many countries have been tested the man-made UFOs and the problem has always been the power source. Here I must mention, that when I'm writing about the saucer-shaped craft, I mean that the cross-section of the craft would actually look like the hat.
The hypothetical man-made UFO could look like shellfish.
And the vertical form of the device could be everything. But if we are thinking about the round, or saucer-shaped form, that would allow that the craft could move every direction in the same speed, and the horizontal movements can be created by using the radially installed rocket or ion-rocket engines. That hat-shaped space device would rotate the plasma through the hole, where is installed the high power magnets, what would pull the ions through that hole.
The rotating plasma would make overpressure under the device, and that will rise it to hover on the airborne. This system could also installed to every kind of aviation vehicles. That would give the change to create vehicles, what has outstanding maneuverability, and the idea of this kind of systems have claimed to get from the UFO encounters.
The horizontal magnetic ion-accelerators could cause shellfish-shaped form. The craft would use those systems to horizontal movements. This could explain the electric disturbances near the UFO incidents.
The idea of this kind of devices is that they can rise to airborne and if the device can fly horizontally by using quite a small jet or rocket motors, and this thing would also work well if the craft is a cigar-shaped thing. If under the vehicle is the magnet track, it can use ions to move horizontally.
In this case, the device would have furrows on the outer layer, and it would look a little bit like a shellfish. The thing is that the magnets would make ionized gas layer around the craft, and the magnets, what are in its outer layer would use those ions for making the horizontal thrust.
Comments
Post a Comment