Skip to main content

The little writing about the nanotechnical polymer, and the abilities of that material.

The little writing about the nanotechnical polymer, and the abilities of that material.

This nanotechnical material would consist of two components, the wax, where are the nano-sized springs. And the primer, what contains the molecule-sized tweezers. 

We might call this material as the real-life "Turtle Wax". It would be the polymer, which can be spread on the layer,  and that thing is so easy to use, that it would be like waxing the car. But this material would give the layer extreme strength. The idea of this material is that there are nanotechnical springs in the polymer, and when the layer would be magnetized, all springs would turn to the same direction.

The nanomaterial gets its strength because it involves those nano-sized springs. At the end of those springs is an iron atom, what makes possible to put those springs in a certain direction. This means that, when the wax or nanotechnical polymer would put on the layer, the piece would be magnetized, and that makes those springs turn in the right direction, as I wrote earlier.

The idea is to benefit the magnet to turn the springs in the right position. And the molecule size tweezers could keep them in the right position after the magnet field is removed. 

Because those springs would receive the hit, that would make the layer extreme hard. And that thing would give a change to avoid scratches of the automobile if that thing is parked in the place, where scratches are usual, but this material would be used to cover every layer, what wanted to cover.

The idea is that the magnet would be behind that layer, and the thing is that the spring could connect to the layer by some other ways that use magnets. This means that the molecule-sized springs would turn in the right direction, and then the paint, what might spread under the "turtle wax" would be equipped with the small, molecule-sized tweezers, what will touch to those springs, when they are in the right position. That would make sure, that the wax is stabilized on the layer.
Labels:

Comments

Post a Comment

Popular posts from this blog

Could this be the thing, that some people don't want you to know about zombies?

Could this be the thing, that some people don't want you to know about zombies? The simplest way to control zombies, which are made by using tetrodotoxin, which is called "zombie poison" is to use the automatic dispenser, which is normally used in diabetes treatment. In this case, the dispenser would be loaded by using tetrodotoxin. If the level of this poison is right, the person would be totally under the control of other people. And if the system cannot detect this poison there is a possibility to make the laboratory experiment when the staff will follow the decrease of the tetrodotoxin, and then the system can use a simple clock, which will inject poison to the body of a victim after a certain time. This would be an effective tool in the hands of military and counter-terror operators. Those zombies can be captured enemy operators, who will send back, and then they just kill their ex-partners. By using genetically engineered bacteria could be possible to create t...
Post a Comment
Read more

The story of (Northrop?) TR3A "Black Manta"

    Image I The story of (Northrop?) TR3A "Black Manta" Sometimes there have been discussions that the mysterious TR3A "Black Manta" was a study project for the B-2 bomber.  That means that TR3A was used as the flying mockup for testing the aerodynamic and control solutions for the B-2 "Spirit" bomber. The thing that supports this thing is that the manufacturer of both planes is Northrop corporation.  Along with "Aurora" was flying one other mysterious aircraft, TR3A "Black Manta". The system is described as the "Stealth VTOL" (Vertical Take-Off and Landing) aircraft. Unless the mysterious TR3B, the Northrop TR3A is the conventional VTOL-aircraft, what is using regular jet engines, but what has the stealth-body.  Image II The thing is that the stealth-reconnaissance aircraft, which uses a similar technology with the Northrop B-2 bomber would be an interesting part of the weapon arsenal. There is a possibility that the TR3A was...
Post a Comment
Read more

The cyborg lichen can be one of the most exotic visions of what the high-tech civilization might look like.

.     The cyborg lichen can be one of the most exotic visions of what the high-tech civilization might look like. Above is the image of the nano-submarine. There is introduced an idea, that this kind of system would equip with living neurons, which makes it like some kind of artificial bug or mosquito. The idea is that the robot can take the nutrient by using the robot tube, which acts like a proboscis. The neurons can get nutrients and the rest of the machine can use small fuel cells or the energy to that system can deliver by using the radio waves. Futurologists are thinking about the ideas, what the hybridization of the neurons and machine would look like? Could the hyper-technical civilization look like the group of midget submarines? Those submarines might take nutrients for the neurons, what is living in them. The purpose of the midget submarines, which might be size less than a couple of millimeters would maximize the survivability of the neurons. One of the most intere...
Post a Comment
Read more